Products

Contact Person : Mr. Yang Max
Company Name : Shenzhen Gls-Electron Technology Co., Ltd.
Tel : 86-755-36941438,15012838660
Fax : 86-755-28442784
Address : Guangdong,Shenzhen,303,9 bldg,NO.38 Shuibei,Luohu district,Shenzhen
Country/Region : China
Zip : 518000

12V 50W Switching Power Supply for LEDs

Product Detailed

1.50W LED power supply 2.High reliability,long life span 3.CE&RoHs approved 4.2 years warranty 5.EMI filter installed

ModelSpecification	HS-50-5	HS-50-12	HS-50-15	HS-50-24
DC output voltage	5V	12V	15V	24V
Output voltage tolerance(Note:2)	±2%	±1%	±1%	±1%
Rated output current	10A	4.2A	3.4A	2.1A
Output current rage	0-10A	0-4.2A	0-3.4A	0-2.1A
Wave and noise(Note:3)	80mVp-p	100mVp-p	100mVp-p	150mVp-p
Inlet stability(Note :4)	±0.5%	±0.5%	±0.5%	±0.5%
Load stablity (Note :5)	±1%	±0.5%	±0.5%	±0.5%
Efficiency	78%	80%	80%	84%
Adjustable range for DC voltage	+10,-5%	+10%	+10%	+10%
AC input voltage range	86-132VAC/170-264VACSelected by switch47-63Hz;240-370VDC
Input current	1.3A/115V 0.65A/230A
AC INnrush current	Cold-start current 18A/115V 36A/230V
Leakage current	<1 mA/240VAC
Overload proctection	105%-150% hiccup mode,auto recovery
Temperature coefficient	±0.03%/°C(0-50°C)
Setup rise hold up time	200ms,100ms,30ms
Vibration	10-500HZ,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltage	Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
Isolation resistance	Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ
Working temperature and humidity	-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity	-20°C~+85°C.10%~95%RH
Overall dimension	111×78×36mm
Weight/Packing	0.26Kgs, 50pc/CTN
Note:1.The testing condition for the parameter above is :230VAC input,rated load,25°C70% RH.2.Tolerance include the setting tolerance,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%.