Shenzhen Gls-Electron Technology Co., Ltd.
Main products:LED Driver,Waterproof Driver,Non-Waterproof Driver,Table Adaptor,Wall-Plug Adaptor
Contact Us
  • Contact Person : Mr. Yang Max
  • Company Name : Shenzhen Gls-Electron Technology Co., Ltd.
  • Tel : 86-755-36941438,15012838660
  • Fax : 86-755-28442784
  • Address : Guangdong,Shenzhen,303,9 bldg,NO.38 Shuibei,Luohu district,Shenzhen
  • Country/Region : China
  • Zip : 518000

12V 200W LED switching power supply

12V 200W LED switching power supply
Product Detailed
1.12V 200W switching power supply 2.Constant voltage 3.CE&RoHs approved 4.2 years warranty 5.EMI filter installed

200W Switching Power Supply

DC output voltage5V9V12V13.5V15V24V27V48V
Output voltage tolerance(Note:2)±2%±1%±1%±1%±1%±1%±1%±1%
Rated output current40A22A16.5A14.7A13A8.3A7.4A4.2A
Output current rage0-40A0-22A0-16.5A0-14.7A0-13A0-8.3A0-7.4A0-4.2A
Wave and noise(Note :3)120mVp-p150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p200mVp-p
Inlet stability(Note :4)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
Load stablity (Note :5)±1%±1%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
Adjustable range for DC voltage4.5-5.6V6-9V10-13.2V12-15V13.5-18V20-26.4V26-32V41-56V
AC input voltage range90~132VAC/180-264VAC selected by switch 47-63Hz;254-370VDC
Input current4.5A/115V 2.5A/230V
AC INrush current

25A/115V 50A/230V

Leakage current<3.5mA/240VAC
Overload protection105%~135% hiccup mode, auto recovery
Over voltage protection115%-135% cut off the output, auto recovery
High-temperature protectionRectifier >= 105°C cut off the output, autorecovery
Temperature coefficient±0.03%/°C(0~50%)
Setup rise hold up time200ms,100ms,20ms
Vibration10~500Hz,2G 10min,/1cycle,Period for 60min,each axes
Withstand voltageInput and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
Isolation resistanceInput and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ
Working temperature and humidity-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity-20°C~+85°C,10%~95%RH
Overall dimension199×98×50mm
Weight/Packing0.7Kgs, 24pcs/CTN

Note:1.The testing condition for the parameter above is :230VAC input,rated load,25°C70% RH.Humidity.2.Tolerance include the setting tolerance,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%.

12V 200W LED switching power supply

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.